Speedo x DMC Super Fins

SIZING EXPLAINED

All feet are very different, so fitting a foot into a fixed shape foot cavity of moulded flexible material is an inexact science. Whilst our fins do not correlate directly to shoe sizes as the construction of fins and shoes are very different, we do suggest a close-to shoe size as a secondary size guide.

Please note that each of our fin models has its own mould, so sizes may vary between models. Original Training fin, Elite II TRi, SUPER Fin, and Repellor fins are a universal foot, meaning you can wear either fin on either foot, also giving you a wider foot cavity. Our Elite and Elite MAX are specific left and right foot fit.

1: Check Length – Stand on a piece of paper toe to wall. Measure to the end of heel (in the arch) as this is where the strap sits - put a dot here. Measure from end of paper to dot. (Should be the length of your foot +/- 3-5mm)

2: Measure the distance between front and back dots. This should be the length of your foot

FITTING YOUR FINS 

DMC fins are made of a silicone-based material which offers maximum comfort, and like most polymers, care is required when putting the fin on without overstretching the strap.

Step 1: Push the fin as far onto the foot as possible before pulling the strap

Step 2: Lift the strap over the heel

Step 3: Adjust for comfort

TEST YOUR FIN SIZE:

Sit on a chair, extend your legs, and flex your ankle/foot out. This is your swimming position. They are not a shoe so standing in them will not test the correct size.

CARE FOR YOUR FINS: 

Our fins are made of a silicone-based material called SILFORM - which offer maximum comfort, and like most polymers, care is required not to expose them to any abrasive materials or sharp objects. 

Please refer to our model sizing charts below as a guide.